Manjaro on Reddit

so i know how to get past it but the cause i don't know. so when i log in there is sometimes a blank screen, one of those black screens your monitor is on but its just black so there is a signal. how i get to my desktop is ctrl+alt+F1 and then i'll hit ctrl+alt+F2, if F2 doesn't work ill do the F1 again and then it will show my desktop. i tried the ctrl+alt+F1/F2 because i saw a form about it and they said bring up the terminal and i looked up how to bring up the terminal do see whats up and it got my screen back. its rather annoying and i was wondering if anyone knows whats up? today i got Moonlight and put Sunshine on my Windows PC and when i exited from Moonlight i got the same blank screen Edit: i use KDE x11 submitted by /u/HunterBearWolf [link] [comments]

First off I'd like to say that I'm very new to Linux. Earlier today I had an issue where I couldn't log in even with the correct password. I decided after some consideration to switch to mint because I'd heard it's a lot easier for newcomers. But now my USB ports aren't working so I can't open the boot menu on start up. I'm not dual booting so I can't try and see if it works on any other operating system and I'm not on a laptop so I have no access to a keyboard or mouse. Is there anything I can do? submitted by /u/Aja9001 [link] [comments]

https://preview.redd.it/b2ttpt5x584e1.png?width=1442&format=png&auto=webp&s=2e4468b04f61e1d10920120b2717d96120aa0ac0 i cant download a 64bit iso submitted by /u/Relative_Fruit2767 [link] [comments]

So I have powerlevel10k installed because it looks awesome, but I'd like to have it in my integrated terminal too for VSCode. So system wide font is MesloLGS NF, I changed the terminal theme too, and also in VSCode terminal.integrated.font.family, yes that has been changed. I can see the icons, so it must be working but the only thing I can't figure out is how to get these blurred lines. So has anybody figured this out? I must be doing something wrong. But I can't figure out the solution. submitted by /u/TastyDepartureFrom [link] [comments]

submitted by /u/inshaz [link] [comments]

After the latest update my controller (Xbox series control) won't be recognized by the system, neither connected by usb or using the wireless dongle (via xone from the AUR, focus on the usb part). Before the update I was using kernel 6.11 and the controller worked just fine but I decided to switch to 6.12 after the update and in neither is working right know. I'm speaking of the kernel because when I tried 6.6 LTS it works just fine even after the update. submitted by /u/Naive-Marsupial-3990 [link] [comments]

i’m stuck at login after my last update (didn’t update in a month or so) KDE Plasma switched to tty i get same errors when trying to switch theme from command line my guess kio is broken submitted by /u/AccomplishedMaybe221 [link] [comments]

I want to know if there is some terminal application that can be used like caffeine app to disable and enable auto suspend, and I don't need to install any application outside repository or extension. submitted by /u/Traditional-Bag6029 [link] [comments]

Started using manjaro a month or two ago after +10 years of ubuntu, and today I got +600 updates. Is this some seasonal base library update thing or did something happen in the backend? There's no news about it in their site. submitted by /u/DuendeInexistente [link] [comments]

Hey Everyone I get the following error when upgrading, is there any fix? Root : / Conf File : /etc/pacman.conf DB Path : /var/lib/pacman/ Cache Dirs: /var/cache/pacman/pkg/ Hook Dirs : /usr/share/libalpm/hooks/ /etc/pacman.d/hooks/ Lock File : /var/lib/pacman/db.lck Log File : /var/log/pacman.log GPG Dir : /etc/pacman.d/gnupg/ Targets : None :: Synchronizing package databases... core is up to date extra is up to date multilib is up to date :: Starting full system upgrade... :: Replace lib32-libva-mesa-driver with multilib/lib32-mesa? [Y/n] :: Replace lib32-mesa-vdpau with multilib/lib32-mesa? [Y/n] :: Replace libva-mesa-driver with extra/mesa? [Y/n] :: Replace linux610 with core/linux-meta? [Y/n] :: Replace linux610-virtualbox-host-modules with extra/linux-virtualbox-host-modules-meta? [Y/n] :: Replace mesa-vdpau with extra/mesa? [Y/n] :: Replace qcoro-qt6 with extra/qcoro? [Y/n] :: Replace tracker3 with extra/tinysparql? [Y/n] resolving dependencies... looking for conflicting packages... error: unresolvable package conflicts detected error: failed to prepare transaction (conflicting dependencies) :: tlp-1.7.0-1 and power-profiles-daemon-0.23-2 are in conflict Any idea how I can fix it? submitted by /u/ForsakenAd9651 [link] [comments]

Nothing there for so long i have been having a Bluetooth problem with Manjaro (Kernel: 6.10.6-10-MANJARO), i have tried using different kernels but still i can not connect to my devices, sometimes when i search for my devices (Keyboard, earbuds, mouse) they show up but can't connect to them now i can't even see them in Network Manager so i can pair to them. Also: Yes me Bluetooth service is enables and tried restarting too. Thanks in advance. submitted by /u/T4zerVZ [link] [comments]

I had to reinstall my manjaro on a new machine because the motherboard was faulty, I was able to recover my disk on which I mounted Home. only when I plug my disk into the new machine and I plug my disk into the Home folder I have a padlock and I can't copy it. Do you know how I can do it? submitted by /u/trotroyanas [link] [comments]

Finally!!! Plasma wayland session finally worked when I was at the point to move to Mint. I could scale each monitor independent and no blank/pixly /weird screen issues. Desktop: Intel 13th gen Nvidia 3060 Ti 64 GB RAM Thank you Manjaro!!! submitted by /u/Dapper_Process8992 [link] [comments]

tried everything ive seen on the net. nothing works. Screen 0: minimum 320 x 200, current 7168 x 2160, maximum 16384 x 16384 DisplayPort-0 connected primary 2560x1080+768+0 (normal left inverted right x axis y axis) 798mm x 334mm 2560x1080 59.98 + 74.99* 1920x1080 74.99 60.00 50.00 59.94 1680x1050 59.88 1600x900 60.00 1280x1024 75.02 60.02 1440x900 59.98 1280x800 59.91 1152x864 75.00 59.97 1280x720 60.00 50.00 59.94 1024x768 75.03 60.00 832x624 74.55 800x600 75.00 60.32 720x576 50.00 720x480 60.00 59.94 640x480 75.00 60.00 59.94 DisplayPort-1 connected 768x1366+0+0 left (normal left inverted right x axis y axis) 410mm x 230mm 1366x768 59.79*+ 1920x1080 60.00 59.94 1280x720 60.00 59.94 1024x768 75.03 60.00 832x624 74.55 800x600 75.00 60.32 56.25 720x480 60.00 59.94 640x480 75.00 60.00 59.94 720x400 70.08 DisplayPort-2 disconnected (normal left inverted right x axis y axis) HDMI-A-0 connected 3840x2160+3328+0 (normal left inverted right x axis y axis) 800mm x 450mm 3840x2160 30.00*+ 24.00 29.97 23.98 4096x2160 30.00 24.00 29.97 23.98 1920x1200 30.00 1920x1080 60.00 59.94 30.00 24.00 29.97 23.98 1600x1200 30.00 1680x1050 59.88 1280x1024 75.02 60.02 1440x900 59.90 1280x960 60.00 1360x768 60.02 1280x800 59.91 1152x864 75.00 1280x720 60.00 30.00 59.94 29.97 24.00 23.98 1024x768 75.03 70.07 60.00 800x600 72.19 75.00 60.32 720x480 60.00 59.94 640x480 75.00 72.81 60.00 59.94 720x400 70.08 I am sure 4k 60 hz is possible due to my dual boot on windows 11. it is nothing related to hardware. i have a xt 6750 xt. everything works fine in windows. submitted by /u/HereIsACasualAsker [link] [comments]

I just finished building my pc and I try to boot using manjaro on a flash drive that i flashed using ventoy and once i plug it in i select my boot method then it just goes to a prompt saying /ventoy/busybox/sh : can't access tty; job control turned off Can i get some help ? submitted by /u/Dr1x16 [link] [comments]

I updated an old laptop with Manjaro and was unable to boot afterwards. So I created a live USB iso installer, but my 'sda' hard drive is not found in gparted, and is giving the following error in disks: Error wiping device: Failed to probe the device '/dev/sda/' (udisks-error-quark,0) I tried to create the partition manually in the installation but it also failed Is there a way to fix it? I tried with calamares but it also failed submitted by /u/Vasallo7G [link] [comments]

submitted by /u/iphones2g- [link] [comments]

SOLVED - I bought a MSI Katana with 4050 RTX GPU for my wife. Neither of us are gamers so just getting it working is fine. The live USB was made with manjaro-xfce-24.1.2-241104-linux610 and the checksum was correct. It boots fine and appears to install fine. However the install fails to start the GUI. I tried ALT F2 and was able to log in. The result of inxi is here Seems like there are 3 graphics drivers installed? Can anyone help me to get the GUI working? submitted by /u/msjs08 [link] [comments]

I am running manjaro linux kde on my HP laptop. I recently got a new battery a few months back in August. It was working fine but. But from a few days I have been experiencing this issue. What happens is that my laptop randomly shuts down below 40% and won't turn on, until I plug in the charger and only then it boots in. And it starts to charge from 40%. I searched online and found a calibration method like using laptops until it shuts down then charge it again to 100% and then etc. I did that but again it still shuts down below or at 40%. Any help is appreciated. submitted by /u/Drshponglinkin [link] [comments]

I'm using Manjaro Linux kernel 6.11.10-2. "Add/Remove Software" is reporting that package qBittorrent is available from "Official Repositories (extra)" at version 4.6.7-1 and this is simply not correct (current). A quick visit to the Arch Linux Package Search reveals that Arch is current at version 5.0.2-1 (and has been for quite some time now). Am I supposed to be doing something to stay current? Is this just "Manjaro being Manjaro" (intentionally running behind). TIA. submitted by /u/IAmAnAudity [link] [comments]

My touchpad on my laptop isn't as accurate as it was in windows, which means placing my cursor on certain things is *really* annoying. Is this a known issue? I've looked around and I can't find anyone else who has reported this issue. I'm using XFCE. submitted by /u/Cubicshock [link] [comments]

Preparing... Checking dependencies... Removing hipcpu-git (r31.0aa4e2c-1)... Running post-transaction hooks... Arming ConditionNeedsUpdate... Refreshing PackageKit... Transaction successfully finished. Preparing... Synchronizing package databases... Refreshing DEB_Arch_Extra.db... Resolving dependencies... Checking inter-conflicts... Failed to prepare transaction: could not satisfy dependencies: - unable to satisfy dependency 'rocm-core' required by hip-runtime-amd - unable to satisfy dependency 'comgr' required by hip-runtime-amd - unable to satisfy dependency 'rocminfo' required by hip-runtime-amd submitted by /u/HereIsACasualAsker [link] [comments]

I was googling this for about half an hour yesterday, and all the answers were very old and didn't work for me. I was trying to pin a shortcut to my nextcloud deck to the dock so I could access it with one click. This is in gnome 47 on latest manjaro. The tutorials online said to create a desktop app link in /usr/share/applications. Didn't work for me for whatever reason. I downloaded epiphany with the intention to set it as the homepage and have a second browser just for nextcloud. I found out epiphany has a built in tool to pin a url to the dock as an application! Now I can one click to go-to my nextcloud interface and it's a nice neat item on my dock with the correct icon and everything! Just wanted to share the tip since I didn't have much luck finding this info anywhere else. submitted by /u/FieldsofBlue [link] [comments]

When usin tmux on top of the Urxvt terminal there is gibberish being printed out to the terminal. [~]$ 10;rgb:bebe/bebe/bebe]11;rgb:2200/2d00/3100 My .Xreferences file is barely edited. I have included a theme which even when not in use causes the above unwated printout. Any suggestions? Thanks in advance. submitted by /u/katinpyjamas [link] [comments]

I have an Archer t2u nano submitted by /u/DiligentMonk182 [link] [comments]