Hi, I decided to install Manjaro 24.1.2 GNOME on a USB flash drive but I get an error: rsync failed with error code 13. And I tried to install it 3 times, chose the erase disk, but nothing helps. Does anyone know what to do? submitted by /u/Consistent-Leg-3524 [link] [comments]
So I have been using linux for about 3 days and there is something I can't fix, No matter how many solutions I apply from the internet or wiki my wifi adapter just doesnt want to function on linux. I tried everything on ubunut then I thought it must just be driver incompatibility so I tried everything on mint even then It didnt and then I tried manjaro because it is known to be driver compatible but even then its nor working. My adapter is the Archer V3 from Tp-link. And the ID it shows when I do 'lsusb' is 802.11ac. Everything else seems to work fine without any problem its just the wifi adapter isnt even being detected on the OS. Someone, Please HELP ME submitted by /u/PhookneWala [link] [comments]
Alright so I'm currently on Linux mint. It's very stable and I haven't had too many issues with it. I really liked Cachyos, however it was a tad more buggy than I could stand at times. I've gotten a bit curious about Manjaro Linux as a result and I'm pretty curious how stable this distro is, being based on arch as well submitted by /u/E123Timay [link] [comments]
Unable to see partition Hello everyone. Trying to install Manjaro (Kde) everything started well was able to do boot from flash drive. When installing i selected sda and it showed no partition. It showed the total storage of my ssd without any partion like ( E drive D drive)Although i made a partition on window ( 55gb unallocated was showing on disc manager windows) is there a way to fix this. Will the installation take place in 55 gb or complete ssd storage will be covered. I previously intalled fedora on other disk of mine (nvme, this is where my windows is installed) this nvme is still showing partion like free space( another unallocated space i created to check) health etc What is caussing this issue? How to fix it? submitted by /u/Lost_Achiver1 [link] [comments]
Hi, I've been a Windows user for a long time and I miss something in Linux that is easy to do in Windows. I want to be able to simply copy an installed program and save it to a hard drive. I want to make it portable. For example, emulators. Is it possible to make a flatpack portable? If so, how? Everything the program needs is actually there. submitted by /u/Soulreaver88 [link] [comments]
Hello everyone, I am new around here and lately I wanna change to some Linux Distro. I really like the Arch philosophy, so I was thinking Manjaro as my new distro, but I have my doubts. I have some experience in Linux but nothing advanced. Do you recommend me Manjaro or any family-friendly distro? submitted by /u/sAngello31 [link] [comments]
Hey guys. I'm wondering is there a Manjaro distro that has a bunch of display settings for things like (specifically) display color calibration sliders built into the settings somewhere that enable upon compatibility acknowledgement ? I remember seeing it on KDE Ubuntu a while ago on certain hardware it activated upon OS install and I was able to do things like (on the sliders) change RGB and color intensity (from full black & white to over-vivid), etc. I'm aware of applications/softwares like xgamma I'm just racking my brain over here for any options I can possibly try to activate color intensity adjustment. Note: I'm asking for specifically on Intel GPUs and maybe ATI too as I'm also aware that nVidia has the control panel still, with all these adjustments still there, even if it's on older distros (I haven't checked the newer ones yet). I'm currently asking for my Intel 11th Gen CPU Iris XE GPU HP laptop, but not limited to .. Feel free to shoot any other ideas my way as well (any apps or softwares I may be able to give a shot and on what distro they work well on, etc.). On Windows there's little softwares like one called "Saturation Toggle" a developer wrote real quick which is basically a little tray icon with a saturation value slider and a custom hotkey toggle on-off setting. Last but not least I am fully aware that this is an ongoing issue with photographers like myself which is why we usually have to either revert back to or stick with nVidia GPUs or use Windows since they have the color sliders right then and there in all three (Intel, nVidia and ATI) GPU panels .. submitted by /u/roiikkata [link] [comments]
Hello Guys, today, I installed Manjaro with KDE Plasma on my PC. It works great but the Desktop has a black Background until I type this command kquitapp5 plasmashell && kstart5 plasmashell How can I fix this? submitted by /u/WasabiDisastrous6686 [link] [comments]
so i just replaced my gtx1050ti with an rx6600. results: Failed to start Light Display Manager only did sudo mhwd -a pci nonfree 0300 so far. do i absolutely have to remove the nvidia driver? plz help, thx! submitted by /u/brrgazzen [link] [comments]
hi everyone, i have lenovo yoga 11e laptop. and it's touchscreen and also i love manjaro. so i install manjaro kde to use touchscreen features too.. but i feel it has lag, or work slowly. for example when i open dolphin file manager i must wait 4-5 sec and it's a little bit annoying. i was wonder are there ways to optimize kde ? my laptop config: CPU: Intel Celeron n3150, (4 core) RAM: 8GB DDR3 GPU: Intel HD Graphics SSD: 128 GB submitted by /u/imrrobat [link] [comments]
Manjaro is at once rock solid and unusable at the same time. I have a Xiaomi laptop that's been running it without even the slightest hitch for nearly a decade. And a gaming desktop PC that used to crash frequently, but now barely lasts its first hour from a fresh install before crashing, black screening or taking forever to complete a logout. Troubleshooting it with the help of chatGPT led nowhere. I have now given up on Manjaro on the desktop, and found Opensuse Tumbleweed to be The One That Just Works. Latest everything with no bother. Detected my hardware and set it up properly. Anyone who denies that Manjaro is unstable is just blessed with hardware that plays nice. Edit: I'm not looking for a fight guys, but go ahead and downvote if you want to be like that lmao submitted by /u/error_museum [link] [comments]
I'm facing a problem every time i try to add a new disk to my device to be always mounted my fstab file looks like this : # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a device; this may # be used with UUID= as a more robust way to name devices that works even if # disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> UUID=B22D-B903 /boot/efi vfat umask=0077 0 2 UUID=edd94ec9-7fe3-47a9-b12d-96bf207e889b / ext4 defaults,noatime 0 1 tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0 UUID=01D75F5051422230 /mnt/media/user_name/disk_1 ntfs-3g defaults,auto 0 0 #UUID=37DD829D5318BEB8 /mnt/media/user_name/disk_2 ntfs-3g defaults,auto 0 0 disk 1 has been mounted for a while with no problems but when i remove the # to mount disk_2 the same way my system doesn't boot up but goes to emergency mode what am i doing wrong? submitted by /u/no_this_is_patrick9 [link] [comments]
Hello, I switched from Windows to Manjaro a few weeks ago, and I have to say I love it. I’ve now ordered new parts for my PC because I want to play more VR games. Does it work normally with Steam VR on Manjaro, or will the OS cause any problems? submitted by /u/RepulsiveChard6277 [link] [comments]
What's happening to our distro? Why are people suddenly arguing about Manjaro telemetry on YouTube as if it were Windows? Is my data already being sent someplace? I have removed both NetworkManager and ModemManager, I connect through a script I made which just uses ip addr and ip route. Is it time for me to move on, and just use Arch? submitted by /u/jabbapa [link] [comments]
https://preview.redd.it/3xytq7k6km0e1.png?width=628&format=png&auto=webp&s=698b29070ff335b12a4d0901e2239ae95e3bd402 Acording to archlinux.org, the new package came out recently (0.0.74-1) https://archlinux.org/packages/extra/x86_64/discord/ However, when I try to update it via pacman, it does now see new package? I still have 0.0.73-1, and since the new one came out, it does not launch anymore, and says that there is an update. I tried doing the same with `yay` - also installing only 0.0.73-1. I am using Manjaro since 2/3 months, and I may not know something, why this is happening. submitted by /u/pr0s3q [link] [comments]
Somehow without any idea what I did, I moved the taskbar to the top of the screen. Unable to move it back. I followed a guide to delete it and then right click and create a new one as default. This worked, but after reboot the lower taskbar doesn't show just an outline placeholder and the right click option doesn't work either. How can I reset the taskbar to the default using KDE plasma?. submitted by /u/SithLordRising [link] [comments]
I recently upgraded my GPU (AMD Radeon rx5700xt( on a Manjaro Linux system and some things aren't working: Firlsty, my Second Display is Not Receiving Signal: The monitor connected via DisplayPort initially shows the BIOS but goes "No Signal" once booted. Secondly i have a lot ofStuttering on Primary Display: My primary screen connected via HDMI displays random, long stutters and occasional blackouts whenever my second display is connected, but not when its connected alone System Specs OS: Manjaro Linux Kernel: 6.10 PSU: 550W Motherboard: Asrock b450 pro 4 (Pcie gen 3) CPU: 105W TDP GPU: radeon rx 5700xt (225 watts I have already tried a lot of troubleshooting steps and am a little lost Checked Power Requirements: Verified PSU capacity should cover GPU and CPU. Kernel and Driver Updates: Switched to an LTS kernel. Updated and reinstalled AMDGPU drivers. Enabled TearFree Option: Added a custom Xorg config with Option "TearFree" "true". Disabled Display Power Management (DPMS) in Xorg configuration. Adjusted BIOS Settings: Disabled CSM and enabled Secure Boot (though it didn’t resolve the issue). DisplayPort & PCIe Slot Settings in BIOS: Couldn’t find manual options for these settings on my motherboard. Other Attempts: Tried a new DisplayPort cable. Flipped Error Logs The main error log under AMDGPU shows: sqlCopy codedrmmode_do_crtc_dpms cannot get last vblank counter Next Steps? Does anyone have advice on what might be causing this issue or additional settings I could try? I’d appreciate any insights. feel free to ask for clarifications in the comments submitted by /u/SleakStick [link] [comments]
I'm trying to boot fresh manjaro-cinnamon usb, but I'm getting error. I have b450ds3h + 3700X + 48GB ram. My bios 'storage boot option' is set to uefi only. I'm not sure what I'm doing wrong. Any help lads? submitted by /u/lpkk [link] [comments]
As stated I let ai optimise my system. I used Hardinfo to benchmark and catelog my system and gave that to chat gpt. Then I acted as it's human agent. Here's what it did: "Here's a concise summary of your system optimization journey, detailing where we began, the steps taken, and the measurable improvements observed: Starting Point Your initial system setup showed: Processor: Intel Xeon E5520 @ 2.27GHz (Mac Pro 5,1), capable but older, suited for multi-threaded tasks. Load and Memory Usage: Higher-than-expected load averages (around 4.72) and memory usage (~7 GB out of 24 GB), indicating resource strain. Kernel: Using Manjaro’s standard kernel, with default GRUB and verbose boot settings. CPU Mitigations: Security mitigations were active, adding CPU overhead. I/O and Swap: No ZRAM configuration, relying heavily on SSD for swap. Key Optimizations Applied Kernel and CPU Configuration: Changed CPU Governor: Set to schedutil for dynamic frequency scaling based on workload. Disabled CPU Mitigations: Set mitigations=off to reduce CPU load, sacrificing speculative execution protections in exchange for better performance. Switched to Real-Time Kernel: For enhanced responsiveness in specific workloads, particularly beneficial in audio/video tasks and low-latency operations. Memory and Swap Management: Enabled ZRAM: Configured a 12 GB ZRAM with zstd compression to handle swap in RAM, reducing SSD wear and improving swap speed. Reduced Swappiness: Adjusted swap tendency to rely more on ZRAM, reducing SSD reliance and further boosting responsiveness. File System and I/O Optimization: tmpfs for /tmp: Moved /tmp to tmpfs to minimize disk I/O for temporary files. Enabled relatime on SSDs: Limited file access time writes to reduce SSD wear. Desktop Environment Adjustments: Compositor and KDE Tweaks: Reduced KDE animation and transparency effects, improving desktop performance. Switched to Wayland: Enabled smoother rendering and input latency reduction, beneficial with AMD hardware. Network and Services Optimization: Disabled Unnecessary Services: Reduced background processes like Bluetooth and IPv6 (if not needed). Set Up tuned: Applied performance profile (throughput-performance) to dynamically manage power and performance for optimal efficiency. Reduced Boot Verbosity and Enabled GRUB Menu: Limited boot messages to show only essential information for a cleaner startup. Configured the GRUB menu to appear by default, facilitating easy kernel selection. Measurable Effects and Improvements Reduced Memory Usage: Dropped from ~7 GB to ~5.1 GB, an improvement of ~2 GB, thanks to streamlined services, ZRAM, and I/O adjustments. Lower CPU Load Average: Initial load averages of 4.72 dropped to around 0.87–1.44, suggesting that CPU overhead and background processing are now more efficiently managed. Faster and Smoother Boot: Reduced verbose output and enabled the GRUB menu, streamlining boot experience. Improved Responsiveness: With the RT kernel, schedutil governor, ZRAM, and KDE tweaks, your system is more responsive, especially in desktop tasks and workloads benefiting from low latency. Extended SSD Lifespan: By reducing SSD write cycles via ZRAM, relatime, and tmpfs for /tmp, we minimized wear on SSD, which is particularly valuable for systems heavily using swap. Summary Overall, these optimizations have transformed your system into a more efficient, responsive environment. The CPU and memory usage improvements, along with faster I/O and reduced desktop latency, are appreciable gains, especially for an older Mac Pro. This setup should now handle multitasking and resource-intensive workloads more effectively while conserving system resources and SSD longevity." submitted by /u/Some-Ad-3938 [link] [comments]
writing this from my phone because Manjaro has absolutely no fallback when there's a boot drive issue, and there's nothing like diagnostics or safe mode or anything, I decrypt the slot, it blinks, and goes to bios because suddenly nothing is bootable. No kind of repair anything is triggered, no options given, just total fail apparently by design because god forbid there should any windows commonality even when it's a really good idea. gotta be hipster and contrarian at all times. what good were all those time shift backups. nothing like restore points here. had to consult with the AI near daily anyway. It's like Linux devs want people to use windows. why is this crap still not ready for prime time? I worked IT for like 20 years, and still. God help any of the poor bastards outside that try to run this shit. thankfully I can at least live boot in and mount the drive so I really only lost my install because grub is trash and there is no intelligent handling of it, just the endless tutorials for the command line. why in the world doesn't the live boot have a diagnostic suite built in? I must be an alien. I guess no one else on this planet wants ease of use. Edit: Timesink, because it is braindead, destroyed my drive because no intelligence is applied to default option population at all. I literally would have been better off manually copying files, and it will only attempt to restore grub and the like IF it's always doing a file operation FIRST. Which is the dumbest troll shit in the world. There is no way to just backup/restore boot conditions. Y'all are a bunch of fanboys in denial pretending any of this is good enough. Windows 7 at launch was better in this regard beyond dispute. Timeshift acts like encrypting your drive is this esoteric nonsense exotic thing as opposed to bog standard best practice. Edit: Culty downvote and sanctioned hate comment ensue. The bottom line is that I'm objectively correct. Manjaro and linux generally as a design choice has no healing or immune system. It's zombieware, any injuries persist indefinitely until manually stitched. And that's hilarious in the same world that recently birthed AI and hires people to write automation. This OS (family?) makes no effort to stay alive. It's like it has a DNR and a death wish. Zero effort has been put into making it robust/recoverable. The entire community's reaction to this fact being stated is a cross between burn the witch and "learn necromancy." submitted by /u/Innomen [link] [comments]
from GUI version it's stuck on preparing and getting error like this while installing from terminal [ruvenus@localhost ~]$ pamac build firefox-esr ** (pamac:4848): WARNING **: 21:52:58.428: transaction_interface_daemon.vala:54: failed to connect to dbus daemon: Could not connect: No such file or directory Authorization not available. Check if polkit service is running or see debug message for more information. (pamac:4848): GLib-WARNING **: 21:52:58.494: ../glib/glib/gmain.c:5934: waitid(pid:4851, pidfd=9) failed: Invalid argument (22). See documentation of g_child_watch_source_new() for possible causes. Preparing... (pamac:4848): GLib-WARNING **: 21:53:07.223: ../glib/glib/gmain.c:5934: waitid(pid:4861, pidfd=9) failed: Invalid argument (22). See documentation of g_child_watch_source_new() for possible causes. Checking firefox-esr dependencies... (pamac:4848): GLib-WARNING **: 21:53:08.096: ../glib/glib/gmain.c:5934: waitid(pid:4864, pidfd=9) failed: Invalid argument (22). See documentation of g_child_watch_source_new() for possible causes. bsdtar: Failed to set default locale (pamac:4848): GLib-WARNING **: 21:53:08.227: ../glib/glib/gmain.c:5934: waitid(pid:4865, pidfd=9) failed: Invalid argument (22). See documentation of g_child_watch_source_new() for possible causes. ** (pamac:4848): CRITICAL **: 21:53:08.228: pamac_daemon_remove_authorization: assertion 'self != NULL' failed ** (pamac:4848): CRITICAL **: 21:53:08.447: pamac_daemon_quit: assertion 'self != NULL' failed [ruvenus@localhost ~]$ device: ARM64 proot-distro submitted by /u/RuVenus [link] [comments]
I have a Dell laptop that has a wifi 6 AX200 by Intel.Recently I was downloading updates and it took forever. But when a speed test was done, 5G was slower then my phone. When standard wifi was tested it was 3 to 4 time faster then 5G. Any ideas why standard is faster then 5G? submitted by /u/feenix3k [link] [comments]